The Best iPhone 16 Cases, Tested and Reviewed (2024) | WIRED

If you buy something using links in our stories, we may earn a commission. Learn more.

I have already cracked the screen on my iPhone 16 Plus. Apple says the Ceramic Shield glass it employs on the iPhone 16 range is twice as strong as before, but a simple 4-foot drop to the pavement was enough to shatter the display on my unit. Welp! This is why I always advocate for a case or a screen protector to guard your expensive new iPhone. There's no guarantee it will prevent a shattered display, but it improves the odds.

There are more than 80 iPhone 16 cases in my office from various brands. iPhone owners are lucky, because there’s no shortage of choice when buying a case. I have sifted through every one of them to find the best iPhone 16 cases worth your time and money, whether you bought the iPhone 16 or the iPhone 16 Pro Max. Cases aren't just about protection—they're tools to personalize your phone—so we have all kinds of options in this guide, ranging from cute to downright protective, along with a few useful accessories.

Read our other Apple guides, like Which iPhone 16 Model Should You Buy?, Best Apple 3-in-1 Chargers, Best MagSafe Power Banks, Best MagSafe Accessories, Best Apple Watch Accessories, and Best AirPods Cases.

Updated October 2024: We've added a grip from OhSnap!, Moment's case and filters, and the Caudabe Paragon.

Power up with unlimited access to WIRED. Get best-in-class reporting that's too important to ignore for just $2.50 $1 per month for 1 year. Includes unlimited digital access and exclusive subscriber-only content. Subscribe Today.

How We Test Cases

These cases were tested across the entire iPhone 16 range. Unfortunately, I cannot do drop tests with the limited devices I have. It's worth noting that while case companies will say their products offer “10-foot drop protection,” this isn't necessarily true. One drop at the wrong angle is all that's needed for the glass to crack.

So here's what I do: I closely pore over every single port and cutout to ensure it isn't covered up by the case. I test all the buttons, make sure the new Camera Control button still works fine, and check how raised the edges around the display and cameras are. I also keep price into account (who wants to pay close to $100 on a case?) as well as style—there are a lot of ugly cases.

Almost all the cases we recommend here have MagSafe magnets embedded inside them, and I've tested them all to ensure perfect compatibility with MagSafe accessories.

What Is Camera Control?

Camera Control is Apple's newest button—yes, a real, physical button—on the iPhone 16 range. Situated further below the power button, you can press it to launch the camera and press it again to take a photo. (You can dive into the settings to customize how the button works.) But it does a little bit more than that. Put some light pressure on the button and it will hide away the camera interface and show you a few modes to cycle through. Choose one, like Zoom or Photographic Styles, and then you can slide your finger on the button to scroll through the options.

How does this pertain to cases? Well, cases have to factor all of this in. Some have a cutout precisely matching the size of the Camera Control button, but that doesn't offer enough room for a finger to comfortably slide and move through the menus. Other cases have larger cutouts that slope in and are much comfier, and some just have a big gap around the button. Keep this in mind as you shop, and I have also tried to highlight this with every case I recommend.

Do you care how your case smells? Probably not. But as soon as I opened up Atom Studios' Split Wood Fiber Case, I couldn't stop putting it up to my nose. It's infused with eucalyptus oil. This has no utility other than smelling nice (the company makes no grand claims about it) but it smells delightful.

That's just the cherry on top, though. The rest of the case hardly has any faults. The edges around the display and cameras are raised, MagSafe support is great, and the buttons are very responsive. There's a roomy, sloped cutout for the Camera Control button that doesn't affect functionality, and I like that it still retains the overall symmetry of the case, unlike some that leave a big gap for this new button. Did I mention it also looks super cool? It's made of the company's proprietary wood fiber, a combination of recycled wood and cornstarch-based ingredients like polylactic acid polybutylene adipate-co-terephthalate (PBAT). There's a bit of aluminum at the top for some pizazz.

If you're weirded out by the eucalyptus oil in the Atom Studios case, consider Caudabe's Synthesis, my second favorite case. The textured edges offer a bit more grip, and the hardshell back features a pleasant texture that's nice to touch. The edges around the screen and cameras are raised, MagSafe works well, and the whole package is slim. The aluminum buttons are super clicky, and the cutout for Camera Control is perfectly spaced and slopes in, making it easy for the fingers to slide over the button.

I have also tested Caudabe's Veil ($34), Sheath ($44), and Paragon ($48). The Veil is an excellent slim case that's grippy. It won't do much for accidental drops but will suffice for everyday scratches. The Sheath is similar to the Synthesis but has more flex and isn't as protective. I quite like the simplicity of the Paragon—the back is smooth (a little slippery), but it has this beautiful shine to it that elevates the look; it's striking, especially in the Ember color. It's pretty smudge-resistant, the bumper offers a good amount of grip, and, naturally, you get the same excellent aluminum buttons.

Spigen's Ultra Hybrid MagFit series has several designs, ranging from a clear case to one that mimics a transparent back, highlighting the phone's internals. The edges are grippy, the buttons are responsive, and the Camera Control experience is similar to Caudabe’s, with a roomy cutout that slopes in for comfort. Best of all, the case maintains symmetry, because you can't see this cutout face-on. The MagSafe connection is great, and the edges around the screen are raised. Hardly any faults here, especially at this price.

I also like Spigen's Enzo Aramid ($40) and Thin Fit ($22) cases if you're looking for other affordable alternatives. The former is available only for the Pro models, and while it's a bit slippery it has a durable aramid and thermoplastic polyurethane shell for improved durability. The Thin Fit checks off all the boxes but is a bit boring.

You bought an ultramarine iPhone 16 and want to show it off. So get Spigen's Ultra Hybrid T MagFit. The front and back are protected by stickers you peel off before installation, so you can ensure the inside is as smudge- and dust-free as possible. It's one of the rare third-party cases with a completely covered button for the Camera Control, much like Apple's official cases. It works perfectly, and the rest of the case is excellent, with raised edges around the display and cameras, clicky buttons, and even a lanyard strap. The downside is it's only available for the iPhone 16 Pro and iPhone 16 Pro Max, but the company expects to make it available for the iPhone 16 and iPhone 16 Plus soon.

I also really like Totallee's MagSafe Clear Case ($39). It's very slim—slimmer than Spigen's case—and unlike Apple's official clear case, the phone's bottom edge is protected. It has a roomy cutout for Camera Control, but I prefer Spigen's button implementation. Totallee has a version that doesn't have MagSafe if you want a true clear case, but it makes the phone's magnetic connection weak.

Sometimes, a screen protector can do more than a case. Seriously! If there's a crack, pop it off and apply another one. While testing, I focused on screen protectors that were the easiest to install because that's most important. If it's hard, it's a waste of cash.

Smartish Tuff Sheet Tempered Glass Screen Protector for $23: This is, in my opinion, the easiest screen protector to apply with very little room for error. It gave me the most precise installation. After you clean your device with the included cleaning tools, put the applicator tool on top of the phone and pull the tab at the bottom. That's it! Now just press down on the middle and you're good to go. You can squeeze out any air bubbles with the microfiber cloth. The tempered glass is thick but doesn't feel sharp on the edges.

Spigen GlasTR EZ Fit Tempered Glass Screen Protector for $19: Spigen's application tool makes it super easy to install a screen protector. You also get two in the box. Clean your phone with the included alcohol wipes, microfiber cloth, and dust stickers, and then remove the cover from the protector and place the tool on top of the phone. Press down and that's it! You even get a fancy squeegee tool to push the air bubbles out.

Gadget Guard Glass 4-Way Privacy Screen Protector for $50: The application process was simple, with little room for error on this tempered glass protector. It's infused with blue-light filtering properties, but I did not notice a significant difference in quality over an iPhone without this protector installed. You only get one protector.

BodyGuardz Apex Ceramic Glass Screen Protector for $60: Now you start to get into the pricier, fancier range of screen protectors. BodyGuardz says this one is made with ceramic glass for improved strength. I can't vouch for that claim, but it feels very nice on the fingers. You get all the usual cleaning supplies, and it's easy to apply with the included tool. You only get one, and it's one of the thicker protectors, but this didn't impact the edges of the screen. If you register your product, you can get free replacements within the first two years after you buy your first protector (you have to pay for shipping). I tested the clear version, but BodyGuardz has options to add blue-light filtering or a privacy screen.

Nomad Screen Protector for $30: Nomad's protector is available only for the Pro models, but the application was near perfect with its included tool (though quite a bit of plastic waste). The air bubbles were minimal and the remaining ones were easy to push out. You get an alcohol wipe, microfiber, dust removal sticker, and only one protector in the box. It's made from aluminosilicate glass, which Nomad claims is 2.5 times stronger than traditional tempered glass; it's decently thick.

Beats made a better iPhone case than Apple. (Apple owns Beats.) If you want something official, I think this case is the way to go, and it's one of the few cases in this guide that completely covers the Camera Control button (there's no cutout). Instead, like on Apple's official cases, you can replicate the functionality on the case itself and it works flawlessly. It has clicky buttons, raised edges around the display and cameras, and comes in nice colors. It's a clean design with a simple polycarbonate back and a soft microfiber lining on the inside.

Moment is famous for its mobile lenses that can be affixed to the back of the iPhone, allowing people to up their mobile photography game. But to do this, you need to use the company's case. Moment's case is elegant, and while the back is a little too smooth and slippery for my taste, the bumper offers a solid grip. There's a spacious cutout for Camera Control and super clicky buttons. On the back you'll see this case now includes the “drop-in lens mount,” which used to be sold separately. This lets you quickly twist in the excellent T-series lenses that Moment debuted in 2023. I've enjoyed using Moment's mobile camera system for years, but this is officially the best implementation because you can now seamlessly attach various filters in seconds. These QuickLock Filters include a variable neutral density filter, which lets you limit the amount of light that reaches the iPhone's sensors, giving you more control over your photo or video's exposure; a little ring lets you control the strength of the filter and it's easily accessible while holding the iPhone in landscape orientation. There's also the CineBloom QuickLock Filter that makes your content look dreamlike and soft, and the AntiGlare CPL QuickLock Filter, which lets you shoot through glass without dealing with weird reflections. Filters for smartphones aren't new, but this system is so easy to attach and detach that now I wouldn't mind bringing these filters wherever I go. The only downside? You can't use them with Moment's lenses—you can only attach one or the other.

Peak Design's Everyday Case has been my go-to for a long time because the company's SlimLink system one-ups MagSafe by making the magnetic connection even more secure. If you pair it with one of Peak Design's mounts, like the Universal Bar Mount, you can easily affix it to any bike or scooter and don't have to worry about your phone flying off when you go over a pothole. When you're ready to take it off, push a button on the top or bottom of the mount and it will release the phone. The case still works just fine with every other MagSafe accessory too.

Outside of the added security, the case is quite nice. The buttons are clicky, there's a spot to attach a lanyard, and the Camera Control button has a roomy cutout that slopes in. You can get the case in multiple colors, but the new bone color is calling my name.

You shouldn't have to pay a ridiculous sum of money for fun, quirky cases. Velvet Caviar's cases are reasonably priced and there are more than 100 designs to choose from (I counted!). My favorites are the Emerald Marble case and the Ghosted Cowboys. The buttons are responsive, and the MagSafe connection is strong, but what most impressed me is how raised the edges are around the display. Even with a screen protector installed, it's quite high above the screen! I didn't find this to impact the iPhone's gesture navigation though.

These designs extend to the company's MagSafe accessories. You can get a 5,000-mAh MagSafe battery in the same design as the case, its MagSafe Wallet, or a phone grip ring.

Are phone grips still in vogue? If you like these handy gadgets that help keep the ever-enlarging iPhone firmly in your palm, then I think OhSnap!'s Snap 4 Grip series is among the best I've tested (and I've used a lot!). I tried the Snap 4 Grip Colors, which seems to be identical to the Snap 4 Grip Luxe, but there are cases with identical colors for perfect pairing. The case is solid, with clicky buttons, a slim profile, protection for the cameras, and a large cutout for the Camera Control button, but the grip is more interesting.

You can use the aluminum grip with any MagSafe phone case, and it comes with an adhesive if you're using a non-MagSafe case. The Snap 4 Grip magnetically sticks to the back of the iPhone (case or not), and other MagSafe accessories can also stick to the back of the Grip, like a MagSafe power bank or a MagSafe wallet. It can passthrough charge, though the phone tends to get very warm, and the magnet is strong enough that the grip and any accessory attached to it doesn't come off too easily. When it's on there, you can pull out the centerpiece and slip your fingers under it for a better grip on your iPhone. (Warning: You might find yourself spinning your phone in your hands when bored.) Best of all, it doubles as a kickstand, though only in landscape orientation.

It's a well-made grip with strong magnets, and it's something you can actually leave on all the time, unlike many grips I've inevitably taken off for one reason or another and, eventually, misplaced.

I love this glittery design, but it's best paired with one of the new colorful iPhone 16 or iPhone 16 Plus models. The vivid colors of Apple's latest phones really pop in this case and the glitter makes it all shine even more. (It even cleverly hides the MagSafe magnets.) There's a roomy cutout for Camera Control, the edges around the screen and cameras are raised, and the buttons are clicky. The case is made from recycled materials. My only minor quibble is the Case-Mate branding on the bottom, but you might not care.

OtterBox's Defender series cases have long been some of the most protective cases I've tested. The Defender Series Pro XT offers more design options so you don't have to sacrifice looks for functionality (more styles available directly from OtterBox). I don't love the way OtterBox handled the Camera Control button on many of its cases—it looks like someone took a bite out of the case—but there's plenty of room to access and use it. It has a double-layer design with a polycarbonate frame on top and a thermoplastic elastomer around it. It's grippy, and the buttons are pretty responsive, and while it is thick, it's not unreasonably bulky. MagSafe and wireless charging work just fine, and even the USB-C port is covered.

You can also save some cash and get a very similar level of protection by going with OtterBox's Defender Pro Series ($65) or even the Commuter Series ($45), which still covers up the charging port.

Constantly needing to prop your iPhone up? This is one of the better kickstand cases out there. It's a little slippery, but it has raised edges around the screen, clicky buttons, and a spacious groove for Camera Control. On the back, you can pull out a kickstand that can rotate 360 degrees, allowing you to prop your device up in any orientation and at various angles. It's a slim case overall, which is not common, as a lot of kickstand cases tend to be bulky. To use MagSafe accessories, you'll have to put the kickstand flat on the back, otherwise the magnetic connection is too weak. There's a slightly different version of this case I haven't tried, but it's available for the iPhone 16 Plus.

I also want to highlight two other kickstand cases: the UAG Plasma XTE ($70), which has a nearly identical kickstand implementation as Torras. It's a bulkier case that's more protective, if that's what you're looking for. And then there's the ESR Hybrid Case With Stash Stand ($27), which cleverly puts the kickstand in the housing around the camera module. That means you can continue using MagSafe accessories with the kickstand propped open. The downside is it works best in landscape orientation. You can prop it up in portrait, but only at a very low angle.

Competition has been fierce in the world of leather iPhone cases ever since Apple officially moved away from manufacturing and selling its own. Out of the handful I've tested, I've come away enjoying Woolnut's Leather Case the most. I love the visible texture in the full-grain Scandinavian leather, and there's a nice microfiber lining inside to keep the back of your iPhone scratch-free. The buttons are aluminum, and the thermoplastic urethane bumper matches the color of the leather—a nice touch. The Camera Control button is easy to access, the buttons are clicky, and the edges around the display and screen are raised. You can choose from four colors: black, cognac, green, and gray.

Looking for alternatives? Nomad's Traditional Leather Case ($60) and Modern Leather Case ($70) are excellent, as always, delivering a classic leather look. Of the two, I prefer the Modern variant, because it uses Horween leather that looks brilliant and not as reddish as the more eco-friendly Ecco leather in the Traditional case. Unfortunately, the latter has too large a cutout for the Camera Control button and looks awkward, whereas the Modern case's cutout needs to be roomier.

Nomad's Folio case is a simple, relatively slim leather case for anyone who doesn't want to carry around a wallet. You get three card slots inside (try not to squeeze too many cards in here) and a pouch for some cash. There's a magnetic clasp to keep the whole thing shut, but you can remove this clasp if you find it gets in the way. I like that the power and Action buttons are textured to identify them quickly, and MagSafe connectivity works perfectly.

Nomad recommends you use a screen protector with this folio case, because your credit cards could scratch the cover glass of your iPhone.

Hate the bulkiness a case adds to your iPhone? Well, I tried a handful of super-slim cases, including the Totallee Thin Case ($39), Mous Super Thin Case ($60), and Latercase Thin Case ($59), but Pitaka's aramid fiber case takes the cake. It comes in 100 percent biodegradable packaging, and it's a very rigid case, but the woven aramid fiber makes it feel super soft. The buttons are all exposed, so if that's a concern, the Totallee might be a better fit. Pitaka has some fun designs, and there's built-in MagSafe, so you don't have to lose out on that feature. Just know that super-thin cases like this are more about keeping the back of your device free from scratches. It's unlikely they'll do much to stop your screen from cracking during a drop.

OK, I fully expected to hate the Arc Pulse. It's just two pieces of aluminum you stick to the top and bottom of the iPhone! How ridiculous. And then I … just left it on the phone for several days. My iPhone felt so svelte in my hands! It's not going to protect your device from everyday scuffs (especially if you're the type to put your keys in the same pocket as your phone, you monster). The company routinely shows off drop tests on its Instagram page and the Arc Pulse impresses, but the rear glass did break after a good stretch of time, so as always, your phone isn't immune. Still, some kind of bumper protection is better than nothing. At least you get to experience most of the iPhone the way it's meant to be held. I also expected the pieces to slide off after a while, especially when pulling it out of a pocket, but this never happened.

These grippy cases have textured edges that help keep the iPhone in your hands and off the pavement, but the Gripzilla goes a step further and has grooves on the edges for an even finer grip. They're still relatively slim cases, though the latter has more bulk around the corners for shock absorption. The buttons are clicky, there's a spacious cutout for Camera Control, and MagSafe works perfectly. There are also some fun prints to choose from, though these can feel a bit sticky on the back of the case.

You can buy Apple's boring silicone case for $50 or this blinged-out G-Form Reflector Case that looks like it belongs to someone in the NBA. The material is grippy, and it's made from 100 percent GRS-certified recycled plastic. These don't have the clickiest buttons, but they're solid, and there's a great sloped cutout for Camera Control. I stuck it to a bunch of MagSafe chargers and it did the job just fine. The bling is reflective too, a showy case for a showy personality.

This BodyGuardz case has two tricks up its sleeve. First, it has vents all along the edges to dissipate heat better than other cases, not to mention a cooling gel to spread the heat. I played Assassin's Creed Mirage and did not notice a difference between this case versus another, though I did feel the heat spreading out rather than staying in one hot spot. So don't take this claim to heart, especially the company's claim that it will improve your battery life. The main reason I like this case is because it blocks the speakers and forces them to push music up toward your face. This makes a notable difference when playing games or watching TV shows, as there's a slight bump in volume when staring at the screen head-on. Cool!

This case is only available for the iPhone 16 Pro models. It's a slippery case, but it has clicky buttons, a nice cutout for Camera Control, and reliable MagSafe connectivity. If you want a similar sound-boosting case for the iPhone 16 and iPhone 16 Plus, check out Catalyst's Influence ($40) case. It's not as effective to my ears, but it comes close and is an otherwise solid case.

If you're a pen and paper kinda person, you might appreciate Moft's Snap Flow, which lets you attach a little notebook and pen to the back of your iPhone via MagSafe. Now you can jot something down wherever you are, and it'll feel all the more tactile than Apple's Notes app. You can put a little notepad on the left and once it's too full, you can store it on the right side of the Snap Flow. The pen is a tiny little thing that magnetically sticks on the inside, and it's thick enough to comfortably jot things down. Moft sells refills for the pen as well as the notepad, and you can also swap to a sticky notepad if you want to leave notes around town. Best of all, there's still a kickstand functionality, so it's a pretty versatile system.

Moft makes several of our favorite MagSafe accessories. I also like its Tripod Wallet Stand ($50)—talk about killing two birds with one stone!

Apple finally fixed my biggest complaint with its official MagSafe Charger. The cable was too short before, so you had to stay close to an outlet. Now, the 6.6-foot cable is plenty long. You can doomscroll in bed and charge your iPhone without worrying about pulling the plug from the wall. It also supports Qi2 and charges iPhones even faster than before—25 watts—though you need to pair it with your own 30-watt wall adapter. That translates to roughly 50 percent in 30 minutes for the iPhone 16 and iPhone 16 Pro.

If you have an iPhone, there's a strong chance you have an Apple Watch and AirPods. Why fuss with multiple chargers to keep them all topped up when you can get a 3-in-1 wireless charger? This Belkin is our favorite and will recharge all your devices wirelessly at the fastest speeds. The treelike design also saves some space on your tabletop, and you also have enough room to place your iPhone in StandBy mode (activated when it's charging and in landscape orientation), where it acts like an alarm clock during bedtime.

We have many recommendations in our Best Apple 3-in-1 Wireless Chargers guide, so check it out if you want other options.

The iPhone 16 range has improved battery life, but that doesn't mean you won't run into days where you'll need a top-up. We have a Best MagSafe Power Banks guide, and this Anker charger is our top pick that supports the new Qi2 standard. It packs a 10,000-mAh capacity, a built-in kickstand, a USB-C port that can charge your phone (and it's how you recharge the battery), as well as an LED to show the remaining capacity. This will juice up an iPhone once and then some, not quite hitting two full charges (depending on the model).

You've got your iPhone, case, screen protector, and MagSafe accessory, now what do you put it all in? I've been using this Shinjuku Sling from Waterfield for the past few weeks to carry all the iPhones as I test them for my reviews. There are two mesh pouches on the inside (perfect for wireless earbuds), plus lots of room for the biggest iPhone and maybe even a compact camera. There's another zippered pocket on the outside that I use to store sunglasses. This sling is made from waxed canvas, and it feels well made and looks lovely, especially in the navy color. There's a patch of leather in the middle for some extra character.

There are so many cases. Here are other ones I've tried that I don't like as much as the picks above but might be suitable for you.

Casely Bold ($35) and Classic Cases for $25: I like the Casely Classic more than the bold—the buttons don't feel as mushy, and the hardshell plastic feels nice. Both have a nice cutout for Camera Control, with raised edges around the screen, and good MagSafe support. They also look fun! There's even a collaboration with the Metropolitan Museum of Art so you can get your favorite painting on the back of your iPhone. Forget the trek to New York.

OtterBox Lumen MagSafe Case for $50: Want to show off your iPhone but still want a bit of flair from your case? OtterBox's Lumen Series is one of a few in its lineup that doesn't have the weird, asymmetrical gap in the case for the Camera Control (like the Beats case above). It matches the Camera Control experience on Apple's official cases—the button is covered but you can still work it the same way. The color accents reflect nicely in the light, and the buttons are responsive. Just know that clear cases tend to attract smudges and dust fairly easily.

Cyrill Kajuk Mag ($23) and UltraSheer Mag ($22): These cases have very grippy sides, so much so that they feel rough. I'm still deciding whether I like it; it's like sandpaper. The UltraSheer Mag has some fun designs (including a transparent color), but the Kajuk Mag also comes in a bundle with a crossbody strap.

Native Union Active MagSafe Case for $50: It's hard to find much fault with this case. It checks off all the boxes and looks pretty while also being made from 35 percent recycled materials. I also tested Native Union's (Re)Classic MagSafe Case ($60), which looks stunning and arguably the case I'd put on over the Active. It almost looks like crocodile leather but nope, it's plastic. Too bad the buttons are a little tough to press. The Camera Control cutout could stand to be more spacious, and this isn't a problem on the Active case.

Zagg Manhattan Snap, Milan Snap, Crystal Palace Snap, Denali Snap, and London Snap for $50: Zagg sent me a bunch of cases, and they all fit well and functioned perfectly, with roomy cutouts for Camera Control and clicky buttons. Some, like the Milan Snap, smudge too easily. But the London Snap stood out in design the most for me, with a lovely fabric texture on the back.

Caseology Athlex Mag ($17), Nano Pop Mag ($19), and Parallax Mag ($19): All three of these cases from Caseology are good, though I would probably go for the Parallax, because it looks the most interesting. The buttons are clicky, and MagSafe works fine, though the edges around the display could be a bit taller.

Nomad Sport Case ($50) and Rugged Case ($60): I like Nomad's cases a lot and the Rugged is an excellent option, with distinguishable power and Action buttons, and a thick bumper that contours to your finger. There's also the Sport case, but I found it too slippery. These cases are only available for the Pro models.

Tech21 EvoClear ($50), EvoDusk ($50), and EvoCrystal Crossbody ($80): The EvoClear is a nice clear case if you're looking for alternatives. It's just not as slim as the Totallee nor does it have the covered-up Camera Control button like the Spigen I recommend above. I like the EvoDusk less, it's just way too slippery. The EvoCrystal is nearly identical to the EvoClear but comes with a lanyard crossbody strap. There are no instructions on how to install the attachment points to the case—I looped it through but my result doesn't look similar to what's on the company's website. I scanned a QR code on the box to “learn more” but it took me to a dead page. Either way, the lanyard works fine and is comfortable across my body, but the overall look is a bit cheap considering the price.

Mujjo Shield Leather MagSafe Case for $59: The Shield is Mujjo's best case this year. It's made from full-grain vegetable-tanned leather that should develop a nice patina over time. The edges around the screen and cameras are raised, and the buttons are clicky. There's a sloped cutout for the Camera Control button, and, unlike Mujjo's other cases, this one has plenty of space for your finger to comfortably press the button and slide around to navigate the menus. The edges of the case feature a rigid bumper grooved for a nicer, more natural grip. It's a shame the Shield is only available for the iPhone 16 Pro and 16 Pro Max. Mujjo is also a certified B Corp, meaning it has been independently vetted to high environmental standards in its manufacturing.

Casetify Impact MagSafe Case for $72: Casetify cases are expensive but the tradeoff is that they are infinitely customizable. The Impact Case has long been my go-to recommendation because it's the most normal-looking case from the company. The sides are super grippy, the buttons clicky, and there's a nice spacious cutout for Camera Control. Use Casetify's Customize tool to change up the style of the case, and you can even add your name to personalize it even further.

Apple Silicone MagSafe Case and Clear MagSafe Case for $49: If you want to stick with official Apple cases, these are fine. They're just a bit expensive for what you get. The silicone cases tend to pick up pet hair and dust very easily, so they feel icky. The Clear case works well, but the buttons require more force to press than our picks above.

OtterBox Symmetry Soft Touch MagSafe ($60), Symmetry Ultra Slim MagSafe ($50), and Symmetry Cactus Leather MagSafe ($60): All of these cases have a big gap for Camera Control, which I don't love. It just looks awkward and is not symmetrical (ironic). The Soft Touch feels very nice but has mushy buttons. The Ultra Slim doesn't have that problem, but it's slippery, and the Cactus Leather model is solid overall. Just know that cactus leather isn't necessarily as environmentally friendly as marketed.

Wave MagSafe Case for $48: You can choose from a lot of colors, but this is an otherwise dull-looking case. The Action Button is a little harder to press, and the whole thing is a bit slippery, but everything else works fine. The edges around the screen are raised, and the MagSafe connection is good. The main reason to buy the Wave is because it's made from biodegradable materials (wheat straw), and the company is a member of Surfers Against Sewage 250 Club, a charity that works to keep the UK coastline clean. Wave Case is based in the UK, so do note the international shipping fee.

Speck Presidio 2 Pro MagSafe Case for $50: I tried an array of Speck cases, and they're all solid, but my favorite is the Presidio 2 Pro. I funnily found it grippier than the Presidio 2 Grip. It checks off all the other boxes, with a roomy, sloped cutout for Camera Control, though the power button is slightly harder to press. Speck has a proprietary locking system called ClickLock that makes the MagSafe system more secure, but you need to pair it with Speck's accessories to get it to work. I think if you tend to use MagSafe wallets, then this might be useful, as it does hold the wallet more securely than standard MagSafe. But for people mounting the iPhone, go with Peak Design's SlimLink.

Spigen Tough Armor MagSafe Case for $26: It's been years and Spigen has not figured out a way to make this kickstand work in portrait and landscape orientation. (It only works in the latter.) Other than that, this is a fine case, if a bit bulky, with clicky buttons and a spacious and sloped cutout for Camera Control. The design's a bit dull.

Burga Tough Case ($24) and Burga Elite Case ($85): Burga's Elite case is very slippery; there are some grips on the edges, but they don't help much. There's a spot to attach a lanyard though. The buttons are clicky on both these cases, with raised edges around the screen, and a cutout for Camera Control. The Tough and Elite cases do not have MagSafe support, so if you want a case without it, here you go. (Why?) That said, the company does sell an Elite MagSafe case ($90) but the price is a little ridiculous. At least there are lots of designs to choose from.

Smartish Wallet Slayer Vol. 1 for $30: This case has an integrated wallet that lets you store two to three cards, and you can easily push them out from the gap on the left. I just don't like integrated wallet cases in this style that add bulk and disable features like MagSafe and wireless charging, so it's not for me, but maybe you don't mind.

BodyGuardz Ace Pro MagSafe Case for $50: Do you want a lanyard? This case comes with one preinstalled (you can remove it). I found the case too slippery, and the buttons are flush with the case, which might contribute to that. At least they're clicky. Camera Control also works well here, but the clear back attracts a lot of smudges. There's also a completely clear version called the Accent Clear ($55), but I didn't like it as much as the Totallee Clear case.

MagEasy Odyssey Strap M MagSafe Case for $45: This is pretty good value considering you get a protective case and a crossbody lanyard. You can even swap out the bumpers at the bottom for when you don't want the lanyard, though how many times are you going to do this? You'll more likely lose the spare bumpers. The Action Button is a bit mushy, but the rest work well. I'd have liked more room in the Camera Control cutout though.

Incase Icon MagSafe Case for $60: I tried a bunch of Incase cases, from the Slim to the Halo, and the Woolenex material in the Icon is my favorite, because it's super nice to hold. It's fairly grippy and checks off all the other boxes.

Mous Limitless 6.0 ($65) and Clarity 3.0 ($70): I have no major qualms with these Mous cases, and you also have a few designs to choose from, like the walnut or the speckled fabric. There's a big gap for Camera Control, and I think it makes the case look awkward, but otherwise, there are clicky buttons, fun textures, strong MagSafe connectivity, and a spot to attach a lanyard.

Casetify Ripple ($62), Bounce ($82), and Ultra Bounce Case ($102): Casetify cases are very customizable, but the company has been leaning hard into its Bounce case design, where it accentuates the corners of the case for improved shock absorption. It just kind of makes the whole thing bulky too. The Ripple case is a bit more reserved, with the Ultra Bounce going balls-to-the-wall crazy with multiple attachment points if you want to affix a keychain carabiner or a crossbody strap. It's expensive and a lot. But at least the cases are solid, with reliable buttons, good MagSafe support, and raised edges around the display.

Moft Snap Case MOVAS With MagSafe for $50: This is a very simple case. The buttons aren't the clickiest, and you get a big cutout for the Camera Control button. It's fairly slim, with raised edges around the display. I prefer the company's accessories to its case, and you don't need a Moft case to use them. That said, you do need it if you want to pair it with the brand's excellent phone lanyard.

Belkin ScreenForce InvisiGlass Privacy Treated Screen Protector for $35: You only get one screen protector, and Belkin doesn't include an alcohol wipe to help clean your phone. (You do get a microfiber cloth and dust-removal stickers.) The application process is OK; it leaves some wiggle room for error. That said, the privacy effect is great. No one can see your screen if they're looking at it from an angle.

OtterBox Premium Pro Glass Blue Light Guard for $50: This one is easy to apply, but there's little room for error, so you have to be careful. I accidentally put mine askew. It's made of 60 percent recycled materials, and OtterBox has infused it with blue-light-filtering tech. To my eyes, I did not notice a difference when comparing it with another iPhone model that did not have a protector installed.

Nomad Magnetic Leather Back for $40: This is now the second “back” I've tested. It's not a case, but just the back of a case magnetically attached to the back of the iPhone. It's purely for aesthetics, but it's not for me. I especially don't like that sometimes when you pull the phone off a MagSafe charger, the leather back stays attached to the charger.

Belkin ScreenForce InvisiGlass Screen Protector for $25: The bare minimum for any screen protector should include an alcohol wipe so you can better clean your screen, and Belkin … doesn't include one. There's also a lot of wasteful plastic, though Belkin says this is made from postindustrial recycled content. The application tool worked well, but I had to work harder to remove the air bubbles.

Zagg XTR4 Screen Protector for $60: I don't think Zagg's application tool is the best. I tried it a few times successfully, but on my third try, I slightly miscalculated the angle when lowering the protector on the display, and unfortunately, the whole thing started sticking askew. I couldn't do anything to stop it. So it's not as good as the protectors above, but this is an otherwise fine screen protector that the company claims has been fortified with graphene for extra strength. I also had some trouble with air bubbles on this one.

Mujjo Full Leather Wallet Case for $64: This velour leather case from Mujjo is mostly OK. I'm not too fond of attached wallet cases like this because they permanently block wireless charging and the entire MagSafe module, making it impossible to attach other accessories with the case installed. You can only fit two cards here, but what makes it worse is the space for the Camera Control button is narrow and makes it hard to slide my finger. It needed a larger groove. I also tested Mujjo's normal Full Leather MagSafe case ($59), which has a standard vegetable-tanned leather model and another made from bio-leather (corn, cereals, recycled polyester), and it too has the same problem with the Camera Control button. This could just be my thick digits.

Some cases are duds. Or they have one flaw that ruins the whole thing. Save your cash and avoid the following ones.

Incase City Case for $50: I am confused about this case. The buttons … don't exist. It's almost like slits where the buttons are, but they're just impossible to press. I am pretty sure the buttons are just missing from my model, which doesn't give me a lot of trust in the company's quality control department. I also didn't really like the Incase Level, which has mushy buttons.

Rokform Tempered Glass Screen Protector for $30: This is a solid screen protector, and you get two in the box, but I just don't think the company's applicator tool is all that effective. There are much easier, cheaper screen protectors you can buy that do the job better.

Rokform Crystal and Rugged Case for $70: These cases are packed with extra magnets if you need additional mounting strength. It literally comes with a magnetic puck you can insert into the middle (replacing the plastic one), though this disables wireless charging. Wireless charging is supposed to work with the default plastic puck installed, but unfortunately, I had no such luck getting it to work on both of these cases.

Caseology Dual Grip Mag Case for $18: Functionally, this case is great. The buttons are clicky, and it even does a great job hiding the Camera Control cutout when looking at the screen (it keeps the phone's frame symmetrical). The back design, however, is a disaster if you want to keep your phone clean. Immediately after installing it, the entire back was covered in dust particles that got stuck between the grooves. My nightmare.

Zagg InvisibleShield Elite Privacy 360 Screen Protector for $60: This is the worst screen protector I've tested, because it adds noticeable lines that make the screen look pixelated or fuzzy. The screen brightness is also noticeably dimmer than without this privacy screen protector; I did not have this much of an issue with the GadgetGuard model.

Turbo Tax Live Assisted - 10% off

H&R Block Deluxe Filing Only $55

Incredible Deals At Instacart: Up To $20 In Savings

Dyson Owner Rewards - 20% Off Dyson Promo Code

Get up to $750 Trade in Credit on the Galaxy S24 Ultra

VistaPrint Holiday Cards Sale Up To 40% Off